The TCM930 is the easiest plug and play way of controlling the transmission behind the Dodge Cummins engine. TCM930 is built specifically for the 47RE or 48RE transmission. It works with the stock valve body and provides fully automatic shifts based on the Vehicle Speed Sensor and a few adjustable settings. The VSS signal controls the shifting for 1st to 2nd & 3rd. The shift points are adjustable right on the controller. No PC required! Overdrive 4th gear and TCC engage are fully adjustable and set independent of the other gears.
The new TCM930 has 4 easy to access setup buttons with glowing indicators and it includes a 6 ft. harness made from high temp automotive TXL wire and our premium automotive grade connectors. There are 4 different screens for monitoring live data and viewing different settings, including MPH and the transmission fluid temp. All settings are done right from the controller and viewed on the Blue LCD screen, no PC programming required.
Doing a conversion using the Cummins Diesel? The TCM930 is a stand alone controller and will work with or without a ECM on the vehicle. From stock pickups to Ford or GM swaps to Rat Rods the TCM930 will work for you.